| Lube gimbal bearing and all fittings |
| Check bellows condition |
| Check power trim operation, top reservoir tank |
| Check engine belts and adjust |
| Check and adjust ignition timing and dwell |
| Check and adjust carburator mixture and idle speed |
| Check power steering top reservoir |
| Check and tighten coolant hoses |
| Check fuel system components |
| Check oil pressure |
| Check charging system |
| R&R drive unit |
| Check engine alignment |
| Lube U-joints |
| Lube prop shaft |
| Lube splines |
| Clean flame arrestor |
| Clean crankcase vent system |
| Replace fuel/water separator |
| Lube distributor shaft (std. ignition only) |
| Check exhaust system |
| R&R sparkplugs |
| Check zincs and anodic bolts |
| Test engine compression |
| Check all electrical connections |
| Change points/condenser(std. ignition only) |
| Change cap and rotor |
| Torque gimbal ring bolts |
| Check/clean battery terminals |
| Top up battery water |
| R&R water pump impeller |
| Tank test engine |
| Grease trailer buddy bearings |
| Check air in tires |
